Update Last: Aug 26th, 2013
We now have another ROM for Lenovo Ideapad K1 based on Jelly Bean 4.2.2, this one from kaschemme. Check it out below.
*DISCLAIMER*
This site bloggers and kaschemme takes no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
Check this post for latest weekly updates: XDA, Thanks to "kaschemme"
THE GOOD |
|
I am going to split this up into two sections.
If you want to update to latest update and have ClockWorkMod recovery and have followed instructions here I posted for CM9 port on your device then follow Option 1 Instructions.
If you are clueless, don't care, then follow Option 2 Instructions.
[ ----- Option 1: Update ----- ]
If you are rooted and have CWM installed follow instructions below, if not skip to Option 2
You need Custom recovery based off of an ICS rom to be able to flash this. If you have any other base, *do not flash* this image, since it will not boot.
Required Files:
Download both of the files below and put them on external SD on your device. (If you have 3G Version of Tablet download that version only, otherwise use WiFi file)
1. Download 1 File Below |
Mirror: CWM Flashable image (WiFi) |
OR |
Mirror: CWM Flashable image (3G) |
2. Download 1 File Below |
LatestGapps: 20130427 Mirror: 20130427 |
Before going forward with this guide, check the following:
Total #'s of files you should have downloaded two, which are CM10 Zip, LatestGapps
Step 3: Only Required if you coming from other ROM. Not required if you are upgrading to the latest version of this ROM from previous one. (Warning: when you do this step it will wipe all your data and you will be required to re enter your Gmail account info and re-set all your settings, home screen, widgets... etc)
Instructions: |
1. Download zip to External SD 2. Reboot to recovery (Use Rom Manager or 'reboot recovery' command) **See Section Below for Instructions if you are stuck on this part*** 3. In Recovery: Wipe Data/Factory Reset 4. In Recovery: Wipe Cache 5. In Recovery: Install Zip from SdCard--> Choose Zip from SdCard 6. In Recovery: Flash the CM10 zip 7. In Recovery: Flash LatestGapps 9. Reboot 10. Enjoy |
How to Reboot to Recovery
Rom Manager Recovery Reboot Method:
Download: Rom Manager from the Google Play Store and open the app and select reboot into recovery
or
Reboot Recovery Command Reboot Method:
Non-rooted version
1. Make sure you have the Android SDK installed. http://developer.android.com/sdk/index.html
2. Make sure USB Debugging is enabled on the tablet. Go to Settings > Developers options > and check "USB Debugging"
3. Connect the device to USB
4. Open a terminal or command prompt window and type
Code:
adb shell k1recoveryFrom a Terminal Application
Run the follow two commands
Code:
su
k1recovery[ ----- Option 2: NVflash Package----- ]
If you never rooted your device and you are stock , follow the instructions below
Required Files:
Download all three files below
Download Wifi or 3g version of Zip File Below
1. Download 1 File from Below: |
NVFLASH (3G): NVFlash (3G) Mirror: NVFlash (3G) |
OR |
2. Download 1 File Below |
LatestGapps: 20130427 Mirror: 20130427 |
Put this file on your external SD on your device.
3. Download 1 File from Below:
Nvflash Windows Drivers: Download
md5sum: 9aa3a4814ca63366329d85a22ed01f64
Install these drivers, before you continue
Before going forward with this guide, check the following:
Total number of files you should have downloaded three, which are NVFlash.zip, LatestGapps, NvFlash WIndows Drivers)
Instructions: |
APX MODE You need to boot into APX Mode, to boot into APX mode: 1. Power off 2. Hold down the Vol - and the Vol + 3. While holding the Volume keys down(- and +), Power on 4. The display should go black, and both LED's on either side of the home button should light up. You are now in, APX mode. |
FLASHING THE PACKAGE |
| 1. Extract the NVFlash.zip (3G or WiFi) contents to a directory (download from above) 2a. If using Windows, double click the "flash-win.bat" file 2b. If using Linux, cd into the extracted directory and run either "sudo ./flash-linux.sh" or "./flash-linux.sh" from a root prompt 3. After table has booted, enter Recovery via long pressing the Power button on tablet, and selecting from menu selction "Reboot" then "Recovery" 4. In Recovery: Install Zip from SdCard--> Choose Zip from SdCard 5. Flash the LatestGapps 6. Reboot 7. Follow Option 1 to update to the latest version!. (HIGHLY RECOMMEND STEP) |
Discover Card $50 cash back bonus, 0% intro APR for 14 months, 0% intro Balance Transfer APR for 14 months, $0 Annual Fee.
No comments:
Post a Comment