HEIMDALL FLASHER FOR SAMSNG S3 & NOTE 2

HEIMDALL FLASHER SGSIII/SGNII SUPPORT!!!

HEIMDALL FLASHER - it's a smart tool for flash Firmware in LINUX
I'll show how to flash SGSIII in UBUNTU By themobilehub.blogspot.com


supported Devices
Samsung Galaxy SIII GT-I9300, I9305
Samsung Galaxy NoteII GT-N7100, N7105
Samsung Galaxy Note10.1-N8000

(Instructions and menu)
PUSH THE BUTTON

  * Before use.

Make sure that all the files have executable permissions tool.Place the firmware files in the folder "FLASH" or place the zip file with the firmware to the root of the instrument
* Menu options.
0 - Configure tools - need to do this once, it will compile and install the components in the system
Flash Menu
1 - Extract ROM - will extract the firmware files to the folder "FLASH" and display the report on file (zip file must be located in the root of the tool)2 - Download mod - Reboot your device in flashing mode (must be enabled debugging USB)3 - Heimdall detect device - show connection status4 - STANDART - flash the standard firmware (the files are shown in parentheses)5 - FULL - full flash firmware with bootloader (the files are shown in parentheses)6 - MODEM - flash the radio (the files are shown in parentheses)7 - KERNEL - flash the kernel (the files are shown in parentheses)8 - RECOVERY - flash rekaveri (the files are shown in parentheses)9 - Download PIT file - extract the file from the device PIT
Root Menu (Root access is required)
10 - DOWNGRADE BOOTLOADER - downgrade bootloader (Requires ROOT and should be included debugging USB)11 - EFS backup - save the image section efs (the image will be saved in the root of the tool)12 - EFS restore - restore partition efs (image must be in the root of the tool)13 - Exit - exit

So:

1. Unpack archive and run script Heimdall_Flasher (unpack package of ROM .tar.md5 into folder FLASH) 

  

2. Configure tools - (need only first time, it's will compile and install necessary components on your PC)

  

3. Download Mode - reboot device into Flash mode

4. Heimdall detect device - it's will show status of connect and images for flasH

5. Choose flash option - after flash device will reboot

6. Exit - Enjoy

7. v.0.0.2 Added option Download PIT - Conect device, choose option 2 (Download mode), after this option 9 (download PIT file), Input any smart name of created PIT and push Enter

HEIMDALL FLASHER v.0.0.5

v.0.0.4 - added item DOWNGRADE BOOTLOADER
v.0.0.5 - added item Extract ROM
- Item added backup / restore efs 

DOWNLOAD HEIMDALL FLASHER v.0.0.5

Donate Us if it Help you and help us to Buy our own Domian & hosting.