Showing posts with label CynogenMod. Show all posts
Showing posts with label CynogenMod. Show all posts

Update Galaxy S4 mini I9190 to Android 4.3.1 Jelly Bean via CM10.2–How To



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Galaxy S4 mini I9190. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Samsung Galaxy S4 mini GT-I9190. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Galaxy S4 mini I9190 below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Galaxy S4 mini I9190. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S4 mini I9190 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S4 mini I9190. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S4 mini I9190.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Galaxy S4 mini I9190 [Filename: cm-10.2-20131118-NIGHTLY-serrano3gxx.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S4 mini I9190

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Galaxy S4 mini I9190.
  3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power button to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131118-NIGHTLY-serrano3gxx.zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy S4 mini I9190 and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Galaxy S4 mini I9190.

Posted by at No comments:
Labels:

Update Galaxy S4 mini I9195 to Android 4.3.1 Jelly Bean via CM10.2–How To



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Samsung Galaxy S4 mini GT-I9195. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Galaxy S4 mini I9195. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Galaxy S4 mini I9195 below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Galaxy S4 mini I9195. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S4 mini I9195 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S4 mini I9195. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S4 mini I9195.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Galaxy S4 mini I9195 [Filename: cm-10.2-20131118-NIGHTLY-serranoltexx.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S4 mini I9195

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Galaxy S4 mini I9195.
  3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131118-NIGHTLY-serranoltexx.zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy S4 mini I9195 and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Galaxy S4 mini I9195.

Posted by at No comments:
Labels:

Update B&N Nook Tablet To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Barnes & Noble Nook Tablet. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your B&N Nook Tablet. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on B&N Nook Tablet below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for B&N Nook Tablet. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for B&N Nook Tablet in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and B&N Nook Tablet. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on B&N Nook Tablet.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For B&N Nook Tablet [Filename: cm-10.2-20131103-NIGHTLY-acclaim.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on B&N Nook Tablet

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your B&N Nook Tablet.
  3. Now, Boot into recovery mode. To do so try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131103-NIGHTLY-acclaim.zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your B&N Nook Tablet and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your B&N Nook Tablet.

Posted by at No comments:
Labels:

Update Iconia Tab A700 To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Acer Iconia Tab A700. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Acer Iconia Tab A700. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Acer Iconia Tab A700 below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Acer Iconia Tab A700. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Acer Iconia Tab A700 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Acer Iconia Tab A700. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Acer Iconia Tab A700.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Acer Iconia Tab A700 [Filename: cm-10.2-20131103-NIGHTLY-a700.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Acer Iconia Tab A700

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Acer Iconia Tab A700.
  3. Now boot into recovery mode. To do so, first boot into bootloader by turning tablet on while in landscape mode and then press the Volume Down and Power buttons together. Follow onscreen navigation instruction to select Bootloader and then Recovery. Your device will soon enter into CWM recovery interface. You can navigate through CWM recovery options using Volume button and use Power button to select items. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131103-NIGHTLY-a700.zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Acer Iconia Tab A700 and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Acer Iconia Tab A700. 

Posted by at No comments:
Labels:

Update HTC One X+ To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your HTC One X+. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your HTC One X+. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on HTC One X+ below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for HTC One X+. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for HTC One X+ in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and HTC One X+. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on HTC One X+.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For HTC One X+ [Filename: cm-10.2-20131028-NIGHTLY-enrc2b.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on HTC One X+

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your HTC One X+.
  3. Boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-enrc2b.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your HTC One X+ and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your HTC One X+.

Posted by at No comments:
Labels:

Update HTC One XL To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your HTC One XL. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your HTC One XL. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on HTC One XL below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for HTC One XL. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for HTC One XL in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and HTC One XL. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on HTC One XL.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For HTC One XL [Filename: cm-10.2-20131028-NIGHTLY-evita.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on HTC One XL

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your HTC One XL.
  3. Boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-evita.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your HTC One XL and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your HTC One XL. 

Posted by at No comments:
Labels:

Update AT&T Samsung Exhilarate SGH-I577 To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your AT&T Samsung Exhilarate (SGH-I577). CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your AT&T Samsung Exhilarate (SGH-I577). The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on AT&T Samsung Exhilarate (SGH-I577) below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for AT&T Samsung Exhilarate (SGH-I577). Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for AT&T Samsung Exhilarate (SGH-I577) in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and AT&T Samsung Exhilarate (SGH-I577). [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on AT&T Samsung Exhilarate (SGH-I577).

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For AT&T Samsung Exhilarate (SGH-I577) [Filename: cm-10.2-20131028-NIGHTLY-exhilarate.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on AT&T Samsung Exhilarate (SGH-I577)

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your AT&T Samsung Exhilarate (SGH-I577).
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up, Volume Down and Power button together until Samsung logo flash twice and then leave the buttons. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power or Home Key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-exhilarate.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your AT&T Samsung Exhilarate (SGH-I577) and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your AT&T Samsung Exhilarate (SGH-I577).

Posted by at No comments:
Labels:

Update Nexus 7 2013 (Wi-Fi) To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Nexus 7 2013 (Wi-Fi). CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Nexus 7 2013 (Wi-Fi). The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Nexus 7 2013 (Wi-Fi) below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Nexus 7 2013 (Wi-Fi). Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Nexus 7 2013 (Wi-Fi) in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Nexus 7 2013 (Wi-Fi). [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Nexus 7 2013 (Wi-Fi).

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Nexus 7 2013 (Wi-Fi) [Filename: cm-10.2-20131028-NIGHTLY-flo.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Nexus 7 2013 (Wi-Fi)

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Nexus 7 2013 (Wi-Fi).
  3. Then, boot into ClockworkMod recovery by pressing and holding the Volume Up, Volume Down and Power buttons together until screen turn on. You will see ClockworkMod recovery screen soon. Use Volume keys to browse between options in recovery while Power key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-flo.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Nexus 7 2013 (Wi-Fi) and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Nexus 7 2013 (Wi-Fi).

Posted by at No comments:
Labels:

Update Galaxy S I9000B To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Galaxy S GT-I9000B. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Galaxy S I9000B. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Galaxy S I9000B below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Galaxy S I9000B. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S I9000B in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S I9000B. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S I9000B.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Galaxy S I9000B [Filename: cm-10.2-20131028-NIGHTLY-galaxysbmtd.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S I9000B

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Galaxy S I9000B.
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the buttons. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power or Home Key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-galaxysbmtd.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy S I9000B and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Galaxy S I9000B.

Posted by at No comments:
Labels:

Update Galaxy S I9000 To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Galaxy S GT-I9000. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Galaxy S I9000. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Galaxy S I9000 below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Galaxy S I9000. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S I9000 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S I9000. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S I9000.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Galaxy S I9000 [Filename: cm-10.2-20131028-NIGHTLY-galaxysmtd.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S I9000

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Galaxy S I9000.
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the buttons. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power or Home Key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-galaxysmtd.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy S I9000 and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Galaxy S I9000.

Posted by at No comments:
Labels:

Update T-Mobile Galaxy S2 SGH-T989 To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your T-Mobile Galaxy S2 SGH-T989. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your T-Mobile Galaxy S2 SGH-T989. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on T-Mobile Galaxy S2 SGH-T989 below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for T-Mobile Galaxy S2 SGH-T989. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for T-Mobile Galaxy S2 SGH-T989 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and T-Mobile Galaxy S2 SGH-T989. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on T-Mobile Galaxy S2 SGH-T989.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For T-Mobile Galaxy S2 SGH-T989 [Filename: cm-10.2-20131028-NIGHTLY-hercules.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on T-Mobile Galaxy S2 SGH-T989

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your T-Mobile Galaxy S2 SGH-T989.
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the buttons. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power or Home Key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-hercules.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your T-Mobile Galaxy S2 SGH-T989 and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your T-Mobile Galaxy S2 SGH-T989.

Posted by at No comments:
Labels:

Update Nexus 7 To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Nexus 7. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Nexus 7. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Nexus 7 below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Nexus 7. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Nexus 7 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Nexus 7. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Nexus 7.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Nexus 7 [Filename: cm-10.2-20131028-NIGHTLY-grouper.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Nexus 7

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Nexus 7.
  3. Then, boot into ClockworkMod recovery by pressing and holding the Volume Up, Volume Down and Power buttons together until screen turn on. You will see ClockworkMod recovery screen soon. Use Volume keys to browse between options in recovery while Power key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-grouper.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Nexus 7 and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Nexus 7.

Posted by at No comments:
Labels:

Update B&N Nook HD To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your B&N Nook HD. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your B&N Nook HD. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on B&N Nook HD below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for B&N Nook HD. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for B&N Nook HD in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and B&N Nook HD. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on B&N Nook HD.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For B&N Nook HD [Filename: cm-10.2-20131028-NIGHTLY-hummingbird.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on B&N Nook HD

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your B&N Nook HD.
  3. Now, Boot into recovery mode. To do so, find a key combination or try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-hummingbird.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your B&N Nook HD and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your B&N Nook HD.

Posted by at No comments:
Labels:

Update Verizon Galaxy Note 2 SCH-I605 To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Verizon Galaxy Note 2 SCH-I605. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Verizon Galaxy Note 2 SCH-I605. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Verizon Galaxy Note 2 SCH-I605 below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Verizon Galaxy Note 2 SCH-I605. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Verizon Galaxy Note 2 SCH-I605 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Verizon Galaxy Note 2 SCH-I605. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Verizon Galaxy Note 2 SCH-I605.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Verizon Galaxy Note 2 SCH-I605 [Filename: cm-10.2-20131028-NIGHTLY-i605.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Verizon Galaxy Note 2 SCH-I605

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Verizon Galaxy Note 2 SCH-I605.
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the buttons. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power or Home Key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-i605.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Verizon Galaxy Note 2 SCH-I605 and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Verizon Galaxy Note 2 SCH-I605.

Posted by at No comments:
Labels:

Update AT&T Galaxy S2 SGH-I777 To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your AT&T Galaxy S2 SGH-I777. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your AT&T Galaxy S2 SGH-I777. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on AT&T Galaxy S2 SGH-I777 below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for AT&T Galaxy S2 SGH-I777. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for AT&T Galaxy S2 SGH-I777 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and AT&T Galaxy S2 SGH-I777. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on AT&T Galaxy S2 SGH-I777.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For AT&T Galaxy S2 SGH-I777 [Filename: cm-10.2-20131028-NIGHTLY-i777.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on AT&T Galaxy S2 SGH-I777

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your AT&T Galaxy S2 SGH-I777.
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the buttons. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Home Key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-i777.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your AT&T Galaxy S2 SGH-I777 and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your AT&T Galaxy S2 SGH-I777.

Posted by at No comments:
Labels:

Update Galaxy S2 I9100 To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Galaxy S2 I9100. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Galaxy S2 I9100. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Galaxy S2 I9100 below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Galaxy S2 I9100. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S2 I9100 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S2 I9100. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S2 I9100.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Galaxy S2 I9100 [Filename: cm-10.2-20131028-NIGHTLY-i9100.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S2 I9100

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Galaxy S2 I9100.
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the buttons. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power or Home Key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-i9100.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy S2 I9100 and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Galaxy S2 I9100.

Posted by at No comments:
Labels:

Update Galaxy S2 I9100g To Android 4.3.1 Jelly Bean via CM10.2



You can now download and install Android 4.3.1 Jelly Bean based custom firmware CM10.2 on your Galaxy S2 I9100g. CynogenMod Team started to roll out nightly version of CM10.2 that enable Android 4.3.1 Jelly Bean on your Galaxy S2 I9100g. The good thing about nightly version is, it updated daily, hence existing issues are fixed much faster. Android 4.3.1 Jelly Bean comes with various new feature over previous Jelly Bean release, hence you may always love to try it. CM10.2 builds also comes with so many customization that you won't see in a stock firmware and can't just avoid. We summed up a detail installation tutorial of Android 4.3.1 Jelly Bean based CM10.2 custom ROM on Galaxy S2 I9100g below.

Some of the cool Android 4.3.1 Jelly Bean features that you will enjoy is permission manager, virtual surround sound, an improve dial pad, better Linux kernel, can establish Bluetooth pairing with low power devices, control user account with restricted profiles, trim feature that not let your phone slow with time and more.

CM-10.2-Android-4.3-jelly-Bean-themobilehub

Warning!

This tutorial is only for Galaxy S2 I9100g. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S2 I9100g in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S2 I9100g. [Guide].

5. Your device have ClockworkMod Recovery Installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S2 I9100g.

File Required(Download by clicking on it)

  1. CM10.2 Android 4.3.1 Jelly Bean ROM For Galaxy S2 I9100g [Filename: cm-10.2-20131028-NIGHTLY-i9100g.zip]
  2. Google Apps [Filename: gapps-jb-20130813-signed.zip]

How to Install Android 4.3.1 Jelly Bean based CM10.2 ROM on Galaxy S2 I9100g

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Galaxy S2 I9100g.
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the buttons. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power or Home Key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm-10.2-20131028-NIGHTLY-i9100g.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy S2 I9100g and boot up into customized Android 4.3.1 Jelly Bean ROM CM10.2. The first boot will take time, so be patient!
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.3.1 Jelly Bean firmware based custom ROM CM10.2 is now installed and running on your Galaxy S2 I9100g.

Posted by at No comments:
Labels:
Subscribe to: Posts (Atom)